Only 18x13mm, and weighing in at a paltry 1.01g, the Tramp Nano packs quite a punch. adequate airflow, output powers of > 500mW (typically 700mW+) are emitted.
Following in its big brother’s footsteps, the Tramp Nano includes high-speed automatic temperature regulation, which avoids overheating transmitters on the starting grid, or after an unexpected landing with lengthy recovery (also with the advantage of saving battery power while transmitting a signal for recovery).
The Nano operates from the 5V regulated supply that most flight controllers supply these days, and doesn’t require a dedicated connection to the flight battery.
Smallest 500mW+ vTx in the business.
TNR Touch-free wand control, with new Nano NFC tag
Locking U.FL to SMA cable included
20 x 20mm Carrier PCB, with Gummies Supplied
Traditional button+RGB LED control of frequency and power
1mW -> 500mW+ linear power control
All 48 standard channels
Built-in thermal protection (second gen)
Factory power normalization
Glitch-Free frequency changes
Micro-power pit mode, with built in ‘pit switch’
Additional channels for race events (Race Wand only)
Retail regional locking without opening package
Dimensions: L=18mm x W=13mm x H = 3.2mm
Weight: 1.01g (Tx only, without SMA cable)
Power Output: Programmable, 1mW to > 500mW 1
Channels: 48 standard, arbitrary using race wand
RF Impedance: 50 ohms
RF Connector: U.FL (with Locking Pigtail)
AV Connector: Solder Pads
TNR Connector: Solder Pads
Modulation: FM Video
Pit Frequency: User/Race Organizer Definable
Video Impedance: 75 ohms
Power Requirements: 5V DC (operates down to ~3.5V, but 5V recommended)
Power Consumption: TBD
1 x Nano VTX
1 x Carrier Board with Silicone Gummies
1 x Antenna Cable